Merrychef eikon e2s User Manual

7 Preparing the appliance for use
eikon e2s Installation and Operating Manual CE 58
Start up
1.
Make all the relevant safety checks and ensure the appliance is
clean and empty.
Then switch the appliance ON.
2.
The easyTouch
®
screen illuminates with the display briefly
showing the serial number and appliance data.
If required, to keep the data on the screen, lightly tap the screen
once to freeze the display. Tap again to continue.
3.
When the appliance is set up with two or more preheating
temperatures a choice is displayed.
Scroll arrows at the bottom of the screen indicate that there are
more temperature choices not shown on the screen.
If necessary, use the scroll arrows. Then select the temperature
required to start preheating the cavity.
4.
During preheating the display shows the progress as the cavity
heats up to the set temperature.
To stop the cavity heating up touch the red ‘X’ symbol at the
bottom of the screen.
5.
The appliance is ready to use when the 'cookbook' is displayed.
Customer guidance and instruction
Instruct the user regarding all safety-related functions and devices.
Instruct the user in how to operate the appliance.

Merrychef eikon e2s Specifications

General

Microwave Power	1000 W
Convection Power	2200 W
Control Type	Touchscreen
Ventless Cooking	Yes
Cooking Technology	Microwave, Convection, Impingement
Warranty	1 year parts and labor
Power Supply	208-240V, 50/60Hz
Power Consumption	3200W
Cooking Modes	Microwave, Convection
Temperature Range	100°C to 275°C