Merrychef eikon e2s - Page 87

8 Cooking procedures
eikon e2s Installation and Operating Manual CE 87
Temperature Band
1.
Select the 'Temp Band' symbol.
2.
Select the required temperature band checkbox, shown by a
green tick.
Generally the lowest practical ‘Temp Band’ should be chosen.
If the set cavity temperature falls by more than the selected ‘Temp
Band’ value, the ready to cook mode and the ‘Temp Band’ are
deactivated until the cavity reaches the preset preheat temper-
ature.
Change password
1.
Select the 'key' symbol to change the passwords of the appliance.
2.
Select the appliance 'settings' or 'service' symbol.
3.
Enter the existing password and press the green tick to confirm.
4.
Enter a new password and press the green tick.
5.
Confirm the new password and press the green tick again.