A
B
C
D
1 2
D
G
K
A B
E
C
F
J
M
H
L
3 4
1. Select the ‘settings’ symbol from the main menu
screen.
2. Enter the password and select OK to display the
Settings menu (3) comprising:
A. Oven mode/navigation settings.
B. Language options.
C. Oven temperature settings and labels.
D. Service information and error logs (password
required).
E. Recipe counters.
F. Date & time settings.
G. Speaker sound levels.
H. Oven Timer (Temperature/ON/OFF).
J. USB program connection.
K. Restore settings to Factory defaults.
L. Temperature Band.
M. Change Settings/Service access passwords.
When nished with a setting, select backspace to
return to the main settings menu.
To exit the settings menu, select backspace,
a prompt will be displayed to either ‘SAVE’ or
‘DISCARD’ any changed settings (4).
OVEN CONTROL SETTINGS10
Oven mode/navigation settings (A)10.1
Select the oven mode/navigation symbol (A) 10.1.1
from the ‘Settings’ menu.
Select ‘Quick Serve Mode’ for cooking only, 10.1.2
or ‘Full Serve Mode’ for cooking & development
programs.
Select ‘Enable Settings’ to display an ‘unlock’ 10.1.3
symbol on the Quick Serve Cookbook screen to allow
access to the ‘Settings’ menu.
Language options (B)10.2
Select the globe symbol (B).10.2.1
Select the checkbox of the required language 10.2.2
from the list shown.
Oven temperature settings and 10.3
labels (C)
To change the oven preheat temperature, select 10.3.1
the temperature symbol (C) to display the keypad,
enter the required temperature and select OK.
Note, the temperature options screen is only 10.3.2
displayed at start up when two or more temperatures
are set above minimum.
To change a temperature label, select the label 10.3.3
to display the keyboard, enter the required label name
and select OK.
For Service information & error logs (D) refer
to Servicing.
To Next Page
Loading...
Need help?
General
