20
Quick Start Guide. Original instructions.
Part Number 32Z3848 GB Issue 3
3
1
2
APPLY OVEN PROTECTOR
1. Only apply to a clean oven. Spray Merrychef® Oven
Protector onto a sponge.
2. Spread Oven Protector lightly onto all internal surfaces of
the oven avoiding cooking surfaces, fan inlets and outlets.
3. Spread Oven Protector lightly onto the internal surface of
the oven door avoiding the door seal.
4. Close the door and switch on the oven. If the air lter has
not been replaced the touch screen will display a warning.
Replace the air lter and then press the green tick.
5. Preheat the oven. Once the oven has reached operating
temperature it will take about 30 minutes to cure the Oven
Protector.
NOTE: Oven Protector turns light brown when cured.
To Next Page
Loading...
