Why are my METER AQUALAB PAWKIT readings constantly offsetting or consistently high?
Consistently high or offsetting readings on your METER Measuring Instruments might be due to a dirty instrument or a dirty filter. Clean the instrument following the directions in Section 4.2.1. Alternatively, change the filter following the directions in Section 4.2.2.
What to do if my METER AQUALAB PAWKIT Measuring Instruments show Error Code 9.99?
Error Code 9.99 on your METER Measuring Instruments indicates the sensor has failed. Refer to Section 4.4 for instructions on how to return the PAWKIT for repair.
What to do if there is visible debris or staining on my METER AQUALAB PAWKIT Measuring Instruments?
If you notice visible debris or staining on your METER Measuring Instruments, clean it according to Section 4.2.1 and change the filter as described in Section 4.2.2. Also, review Section 2.1.1 regarding sample preparation and ensure that you are careful not to get any sample on the rim of the cup. Wipe the rim before placing the instrument on the cup.
General| Accuracy (aw) | ±0.02 aw |
|---|---|
| Resolution (aw) | 0.01 aw |
| Battery Type | 2 AA batteries |
| Display | LCD |
| Measurement Time | 5 minutes |
| Operating Temperature | 5 to 50 °C |
| Sample Volume | 7.5 mL |
| Storage Temperature | -20°C to 60°C |
| Power Supply | 2 AA batteries |
To Next Page
