The MW07 is an 802.11ac Wave 2/a/b/g/n Access Point designed for high-performance wireless networking in various indoor environments. It offers advanced features to enhance wireless coverage, speed, and management, making it suitable for both small office/home office (SOHO) and larger enterprise deployments.
Function Description:
The MW07 functions as a wireless access point, providing Wi-Fi connectivity to client devices. It supports the latest 802.11ac Wave 2 standard, enabling faster data rates and improved efficiency in high-density environments. The device can be configured as an Access Point (AP) or as part of a Wireless Distribution System (WDS) in either AP or Station mode, offering flexibility in network deployment. Its primary role is to extend the reach and capacity of a wired network wirelessly, facilitating access to real-time information and supporting temporary workgroups or frequently changing environments.
Important Technical Specifications:
- Wireless Standards: Supports IEEE 802.11ac Wave 2/a/b/g/n.
- Frequency Bands: Operates on both 2.4GHz and 5GHz bands simultaneously.
- Data Rates:
- 2.4GHz: Up to 800 Mbps
- 5GHz: Up to 1733 Mbps
- Antennas:
- Four 2.4 GHz Metal PIFA Antennas with 3.29dBi peak gain.
- Four 5 GHz Metal PIFA Antennas with 5.84dBi peak gain.
- One Metal PIFA Antenna for scanning radio (2.4GHz/5GHz selectable).
- Radio Chains/Streams: 4x4:4 configuration, indicating four transmit antennas, four receive antennas, and four spatial streams.
- Physical Interface:
- 1 x Gigabit Ethernet (GE) port with 802.3af/at Power over Ethernet (PoE) support.
- 1 x DC Jack (12V) for power input.
- 1 x DC power connector.
- 1 x Reset button.
- Power Source:
- DC Input: 12 VDC/2A.
- PoE: Compatible with 802.3af/at (54Vdc/0.6A).
- Dimensions (W x D x H): 200 x 200 x 40 mm.
- Mounting: Designed for Ceiling, T-Rail, and Wall mount installations.
- Operating Temperature: 0°C to 40°C.
- Operating Humidity: 0% to 90% typical.
- Storage Temperature: -30°C to 80°C.
Usage Features:
- Wave 2 MU-MIMO Function: Enhances efficiency by allowing the AP to communicate with multiple client devices simultaneously, reducing latency and improving overall network performance in high-density scenarios.
- Tx Beamforming: Focuses the wireless signal towards client devices, extending the transmitting distance and improving signal strength and reliability, especially for devices at the edge of the coverage area.
- Scanning Radio: Includes a dedicated scanning radio that is 2.4GHz/5GHz selectable, likely for optimizing channel selection, interference detection, or security monitoring without impacting primary data traffic.
- PoE Support: The Gigabit Ethernet port supports 802.3af/at PoE, simplifying deployment by allowing both power and data to be delivered over a single Ethernet cable, reducing the need for nearby power outlets.
- Flexible Application with 2nd LAN Port: The built-in second LAN port (though only one GE port is listed in the "Physical Interface" table, the "Introduction" mentions a "built-in 2nd LAN port" for flexible application, suggesting potential for bridging or other network configurations) offers additional connectivity options.
- Band Steering: Features customized items for intelligent management of client devices, guiding them to the less congested or more optimal 5GHz band when possible, to improve overall network performance.
- Secured Guest Network: Provides an option to create a separate, isolated guest network, allowing visitors to access the internet without compromising the security of the main network.
- High-Powered Radios and Long-Range Settings: Designed to offer superior range and reach compared to ordinary access points, effectively connecting a growing number of wireless users across larger areas.
- Easy Installation: Wireless LAN (WLAN) products are described as easy to install and highly efficient, making them suitable for various deployment scenarios, including difficult-to-wire environments, temporary workgroups, and SOHO networks.
Maintenance Features:
- Reset Button: A physical reset button is included, allowing for easy restoration of default settings or rebooting the device, which is a common maintenance feature for network equipment.
- Environmental Specifications: The specified operating and storage temperatures and humidity ranges indicate the device's robustness and suitability for various indoor conditions, contributing to its long-term reliability and reducing the need for frequent maintenance due to environmental factors.
- Firmware Updates (Implied): While not explicitly stated as a "maintenance feature," devices of this type typically support firmware updates to address bugs, improve performance, and add new features, which is a crucial aspect of ongoing device maintenance.
Need help?
General
To Next Page
