Metra Electronics 82-3043 User Manual

Installation instructions for 82-3043
CAUTION! Metra recommends disconnecting the negative bat -
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con
-
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
• Adapts 5 1/4”or 6 1/2”speakers to the front door locations
• A) Speaker adapter plates • B) (2) Foam strips • C) (8) #14 x 1/2” Phillips screws
KIT FEATURES
KIT COMPONENTS
WIRING CONNECTIONS (sold separately)
Wiring Harness: • 72-4500
• Phillips screwdriver • Socket wrench • Window crank removal tool
TOOLS REQUIRED
Chevrolet Blazer 1995-1998, S10 1994-1998
GMC Jimmy 1995-1998, Sonoma 1994-1998
82-3043
A B C

Metra Electronics 82-3043 Specifications

General

Material	Plastic
Color	Black
DIN Provision	Yes
Double DIN Provision	Yes
ISO Provision	Yes
Product Type	Radio Install Kit
Connector Type	Wiring Harness

Summary

General Information and Components

Kit Features

Details the adapter's capability to fit specific speaker sizes into front door locations.

Kit Components List

Lists the physical parts included in the installation kit.

Wiring Connections

Specifies the required wiring harness for the installation.

Tools Required for Installation

Lists the necessary tools for performing the installation.

Door Panel Disassembly

Disassembly for 1994-1997 Models

Step-by-step instructions for removing the door panel on specific older vehicle models.

Disassembly for 1998 Models

Instructions for removing the door panel on the 1998 model vehicles.

Speaker and Adapter Assembly

Preparing the Adapter Plate

Instructions on attaching foam strips to the adapter plate for enhanced performance.

Mounting Aftermarket Speaker

Guidance on attaching the aftermarket speaker to the adapter plate.

Installing Assembly to Door

Steps for mounting the assembled speaker and adapter onto the vehicle's door frame.