METRA - The World’s best kits
®
metraonline.com
REV. 10/21/2016 INST-99-5027
Installation instructions for part 99-5027
®
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
© COPYRIGHT 2016 METRA ELECTRONICS CORPORATION
• DIN radio provision with pocket
• ISO DIN radio provision with pocket
• A) Radio housing • B) Radio housing trim piece “A” • C) Radio housing trim piece “B” • D) ISO Brackets
• E) Rear support • F) ISO Trim plate • G) Mounting bracket • H) (4) #8 x 3/8” Phillips screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness:
• Please visit www.metraonline.com
for specific interface applications
Antenna Adapter:
• Not required
• Panel removal tool • Phillips screwdriver
• 86-5618 Ford radio removal keys
TOOLS REQUIRED
Ford/Mazda multi-kit 1995-2011
99-5027 / AT-586FT / AW-586FT / CF-586FT / IBR-527FD
B C EDA
GF H
APPLICATIONS
See application list inside cover
To Next Page
Need help?
General
