Metra Electronics 99-7328 - Kit Assembly: Recessed DIN Radio Provision; Slide DIN Cage into Housing; Slide Radio into Assembly

2
99-7328 KIT ASSEMBLY
B
A
RECESSED DIN RADIO PROVISION WITH POCKET
Slide the DIN cage into the radio hous-
ing and secure by bending the metal
locking tabs outward.
(Figure A)
1
Slide the radio into the DIN cage/hous-
ing assembly until it snaps into place.
(Figure B)
2
Continue to final assembly.
* Note: Refer also to the instructions included with the aftermarket radio.