99-7423 KIT PREPARATION
NISSAN ALTIMA 2007-2011
A
2
Clip the corresponding climate control
trim panel into the radio housing.
Note: There are (2) different climate
control trim panels. One for auto cli-
mate control and one for manual cli-
mate control.
(Figure A)
1
Attach the (2) radio housing brackets
to the climate controls using the fac-
tory screws.
(Figure B)
2
3
Continue to kit assembly.
B
C
Attach the bracket/climate control
assembly to the radio housing using
the (2) #8 3/8” screws supplied with
this kit.
(Figure C)
To Next Page
Loading...
