Metra Electronics 99-7423 - ISO Mount Radio Provision with Pocket

4
99-7423 KIT ASSEMBLY
B
A
ISO MOUNT RADIO PROVISION WITH POCKET
Mount the ISO Brackets to the radio
with the screws supplied with the
radio. (Figure A)
1
Slide the radio into the radio housing
until it snaps into place. (Figure B)
2
Attach the radio housing trim plate
supplied with the kit to the assembly.
(Figure B)
3
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
Snap the pocket into the assembly.
(Figure C)
4
C