METREL A 1532 User Manual

A 1532 EVSE adapter Technical specifications
11
6 Technical specifications
6.1 General data
Input voltage: ......................................... up to 250 V (1-phase), up to 430 V (3-phase)
Frequency: ............................................ 50 Hz, 60 Hz
Maximum test current: ........................... 267 A (10 ms) intermittent operation
PP simulation: open, 13 A, 20 A, 32 A, 63 A
CP simulation: states A,B,C,D,E (CP short to PE via diode)
BNC connector
Resistance BNC case to PE .................. 100 kΩ
Resistance BNC contact to CP .............. 100 kΩ
Amplitude error (10 MΩ probe) .............. -2 %
Protection classification ......................... double insulation
Pollution degree ..................................... 2
Protection degree .................................. IP 40
Measuring category ............................... 300 V CAT II
Altitude ……………………………….. ..... up to 3000 meters above sea level
Dimensions (w  h  l) ........................... 10 cm  7 cm  25 cm
Test lead(s) length ................................. 0.5 m
Weight ................................................ 0.90 kg
Operation conditions
Working temperature range ................... 0 C … 40 C
Maximum relative humidity .................... 95 %RH (0 C … 40 C), non-condensing
Storage conditions
Temperature range ................................ -10 C … +70 C
Maximum relative humidity .................... 90 %RH (-10 C … +40 C)
80 %RH (40 C … 60 C)

METREL A 1532 Specifications

Power

input voltage	up to 250 V (1-phase), up to 430 V (3-phase)
frequency	50 Hz, 60 Hz
maximum test current	267 A (10 ms)

Operating Environment

working temperature range	0 °C … 40 °C
maximum relative humidity	95 %RH (0 °C … 40 °C), non-condensing
altitude	up to 3000 meters above sea level

Weight and Dimensions

weight	0.90 kg
width	10 cm
height	7 cm
length	25 cm