METREL A 1532 User Manual

METREL test and measurement accessories:
EVSE adapter
A 1532
Instruction manual
Version 1.2.3, Code no. 20 752 684

METREL A 1532 Specifications

Power

input voltage	up to 250 V (1-phase), up to 430 V (3-phase)
frequency	50 Hz, 60 Hz
maximum test current	267 A (10 ms)

Operating Environment

working temperature range	0 °C … 40 °C
maximum relative humidity	95 %RH (0 °C … 40 °C), non-condensing
altitude	up to 3000 meters above sea level

Weight and Dimensions

weight	0.90 kg
width	10 cm
height	7 cm
length	25 cm

Summary

Preface

Safety and operational considerations

2.1 Warnings and notes

General safety warnings and important notes for operating the adapter safely.

2.2 Markings on the adapter

Explains the meaning of various symbols and labels found on the adapter.

2.3 Standards applied

Lists the safety and functional standards the adapter is manufactured and tested against.

Adapter description

A 1532 operation

Checking CP signal

Details the procedure for checking the Control Pilot (CP) signal using an oscilloscope.

Maintenance

5.1 Cleaning

Instructions on how to clean the exterior of the EVSE adapter.

5.2 Service

Guidance on contacting the distributor for repairs or service.

Technical specifications

6.1 General data

Provides key electrical and physical specifications of the A 1532 EVSE adapter.