METREL A 1532 User Manual

A 1532 EVSE adapter Maintenance
10
5 Maintenance
Unauthorized person is not allowed to open the A 1532 EVSE adapter. There are no user
replaceable components inside the adapter.
5.1 Cleaning
No special maintenance is required for the housing. To clean the surface of the adapter use a
soft cloth slightly moistened with soapy water or alcohol. Then leave the A 1532 to dry totally
before use.
Warnings:
 Do not use liquids based on petrol or hydrocarbons!
 Do not spill cleaning liquid over the adapter!
5.2 Service
For repairs under warranty, or at any other time, please contact your distributor.

METREL A 1532 Specifications

Power

input voltage	up to 250 V (1-phase), up to 430 V (3-phase)
frequency	50 Hz, 60 Hz
maximum test current	267 A (10 ms)

Operating Environment

working temperature range	0 °C … 40 °C
maximum relative humidity	95 %RH (0 °C … 40 °C), non-condensing
altitude	up to 3000 meters above sea level

Weight and Dimensions

weight	0.90 kg
width	10 cm
height	7 cm
length	25 cm