To Next Page

To Previous Page

MI 2094 CE MultiTester General presentation

1.4. List of measurements carried out by the instrument

 Withstanding programmed voltage - time sequence test

 Withstanding voltage test

 High voltage burn-out test

 Continuity test

 Voltage drop test

 Insulation resistance test

 Leakage current tests (leakage, substitute, touch)

 Functional tests (power, voltage, current, cos φ, frequency)

 Discharge time measurement

1.5. List of applicable standards

CE MultiTester is designed in accordance with the following standards:

 EN 61010-1 ............ safety

 EN 61326-1 ............ electromagnetic compatibility

 EN 61557-2 ............ insulation resistance measurement

 EN 61557-4 ............ continuity measurements

Measurements in compliance with:

 EN 60204-1 ............ Electrical equipment of machines

 EN 60335-1 ............ Household and similar electrical appliances

 EN 60439-1 ............ Switch-gear and control-gear assemblies

 EN 60598-1 ............ Luminaries

 IEC 60745 .............. Hand-held motor-operated tools

 IEC 60755 .............. Residual current operated protect. devices

 EN 60950 ............... Safety of information technology equipment

 EN 61010-1 ............ Safety requirements for electrical equipment

 IEC 61029 .............. Transportable motor-operated tools

 EN 61558-1 ............ Transformers and power supply units

 EN 60065 ............... Audio, video, and similar electronic apparatus

 VDE 701 T1 ........... Repair and modification inspections

 VDE 702 T1 ........... Repeat tests of electrical appliances

Measurements according to standards above are possible only up to 16 A (maximum

power capability of the CE MultiTester).

METREL MI 2094 User Manual

Questions and Answers: