Need help?Do you have a question about the METREL MI 2792 PowerQ4 Plus and is the answer not in the manual?
General| Category | Power Quality Analyzer |
|---|---|
| Data Logging | Yes |
| Memory | 8 GB |
| Battery Life | Up to 8 hours |
| Ingress Protection | IP54 |
| Measurement Types | Voltage, Current, Power, Energy, Harmonics |
| Voltage Measurement Range | 0 V to 1000 V |
| Current Measurement Range | Via Current Clamps (mA - kA depending on clamp) |
| Harmonic Analysis | Up to 50th harmonic |
| Power Measurements | Active, Reactive, Apparent Power |
| Display | Colour TFT LCD |
| Communication Interface | USB, Bluetooth |
| Battery Type | Rechargeable Li-Ion |
| Operating Temperature | -10°C to +50°C |
| Standards Compliance | IEC 61010 |
| Dimensions | 230 mm x 140 mm |
| Safety | CAT IV 600V / CAT III 1000V |
To Next Page