Name: Metro DataVac C5 3 Series
Brand: Metro DataVac
Rating: 4 (1 reviews)

Other manuals for Metro DataVac C5 3 Series

Instructions For Use32 pages

Questions and Answers:

B
benjamin44Aug 4, 2025
Why is the Metro DataVac Heater temperature too hot?
- S
  Shaun DaughertyAug 5, 2025
  If your Metro DataVac Heater's temperature is too hot, first, if the temperature set point is too high, turn the control knob down to a lower setting and wait several minutes to see if the displayed temperature decreases. Also, check the thermostat. If the displayed temperature exceeds 220°F (104°C), the blower wiring may be faulty or disconnected, or the blower may need replacing. In this case, check the blower. If the temperature still exceeds 220°F (104°C), the thermostat or blower may have failed, and the thermal overload device is controlling the temperature. Stop using the cabinet immediately and contact a factory-approved service agent.
V
Victoria Anderson MDAug 8, 2025
What to do if Metro DataVac Heater trips GFCI?
- J
  jorozcoAug 8, 2025
  If your Metro DataVac Heater is tripping the GFCI, it may be because the heater element has absorbed moisture during shipment or long periods of disuse. To resolve this, plug the cabinet (without water in the water pan) into a non-GFCI outlet, set the temperature to '10', and let it run for 30-60 minutes to dry out any moisture. After drying, plug the cabinet back into the GFCI outlet. If it continues to trip the GFCI, call a factory-approved service agent. If it trips the standard circuit breaker, call factory approved service agent.
J
jorge04Aug 12, 2025
Why is my Metro DataVac Heater not generating heat?
- D
  Diane GutierrezAug 13, 2025
  If your Metro DataVac Heater is not generating heat, it could be due to several reasons. If the heat indicator light is on but the cabinet does not draw the appropriate amperage, the air heater element or its wiring may be faulty, or the thermostat may be faulty. If the heat indicator light is not on, the thermostat contacts may not be closing, preventing the heater element from energizing. Check the thermostat and pilot light and their respective wiring.
B
Brian MillerAug 17, 2025
What to do if Metro DataVac Heater blower is not circulating air?
- J
  Jonathan LongAug 17, 2025
  If the blower in your Metro DataVac Heater is not circulating air, the blower wiring may be faulty or disconnected, or the blower may need replacing.