Metrohm 930 Compact IC Flex ChS/PP/Deg Short Instructions

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Installation
930 Compact IC Flex Oven SeS/PP/Deg (2.930.2560)
￭￭￭￭￭￭￭￭
35
Connecting the guard column
Rinsing the guard column
1
Rinsing the guard column
￭ Place a beaker under the guard column's outlet.
￭ Start manual control in MagIC Net and select the high-pressure
pump: Manual ▶ Manual control ▶ Pump
– Flow: in accordance with column leaflet
– On
￭ Rinse the guard column with eluent for approx. 5 minutes.
￭ Stop the high-pressure pump in the manual control in MagIC Net
again: Off.
4.22 Connecting the separation column
CAUTION
New separation columns are filled with a solution and sealed with stop-
pers on both sides. Before inserting the column, ensure that this solu-
tion can be mixed with the eluent being used (follow the information
provided by the manufacturer).
NOTE
Connect the separation column only after the initial start-up of the
instrument. Until that point, insert a coupling (6.2744.040) instead of
the guard column and separation column.

Metrohm 930 Compact IC Flex ChS/PP/Deg Specifications

General

Brand	Metrohm
Model	930 Compact IC Flex ChS/PP/Deg
Category	Laboratory Equipment
Language	English