Metronix ARS 2100 SE User Manual

Page 106
8.12 Connection [X40]
The servo drive ARS 2000 SE with integrated STO function has a combined interface for control and
acknowledgment via the plug connector [X40].
For further information on pin assignment and on the use of the STO function please refer to the
Product Manual “STO (Safe Torque Off) for the servo drives ARS 2000 SE”.
8.13 SD-/SDHC-/MMC-Card
8.13.1 Supported card types
 SD
 SDHC
 MMC
8.13.2 Supported functions
 Load a parameter set (DCO file)
 Save the current parameter set (DCO file)
 Load a firmware file
For more information on this subject, please contact the Technical Support.
8.13.3 Supported file systems
 FAT12
 FAT16
 FAT32
8.13.4 File names
Only file and directory names according to the 8.3 standard are supported.
8.3 file and directory names have at most eight characters (letters or numbers) followed
by a period “.” and a filename extension of at most three characters.
File and directory names may only consist of upper-case characters and numbers.
Product Manual „Servo drives ARS 2100 SE“ Version 5.0

Metronix ARS 2100 SE Specifications

General

Brand	Metronix
Model	ARS 2100 SE
Category	Servo Drives
Language	English