Metronix ARS 2100 SE User Manual

Page 12
1 Table 46: Error messages
116General
1.1 Documentation
This product manual serves the purpose of a safe use of the ARS 2100 SE series servo drives.
It contains safety notes, which must be complied with.
Further information can be found in the following manuals:
 Product Manual “STO (Safe Torque Off) for the Servo drives ARS 2000 SE”: Description of
the functional safety technology for the ARS 2000 SE servo drives with the safety function STO
 Product Manual “Ethernet Technology Module”: Description of the implemented Ethernet
protocol (UDP).
 Software Manual “Servo drives ARS 2000”: Description of the device functionality and the
software functions of the firmware. Description of the Metronix ServoCommander
®
parameterisation program with instructions concerning the start-up of the ARS 2000 servo drives.
 CANopen Manual “Servo drives ARS 2000”: Description of the implemented CANopen protocol
as per DSP402.
You can find all these documents on our homepage at the download area (http://www.metronix.de).
Certificates and declarations of conformity for the products described in this manual can be found at
http://www.metronix.de.
The entire software functionality of the new ARS 2000 SE product range will be implemented in the
course of a step-by-step development process.
This version of the product manual contains the functions of the firmware version 4.0.0.1.5.
Product Manual „Servo drives ARS 2100 SE“ Version 5.0

Metronix ARS 2100 SE Specifications

General

Brand	Metronix
Model	ARS 2100 SE
Category	Servo Drives
Language	English