4. SERVICE / SPARE PART
We recommend that valves be directed to our service cen-
ters for maintenance. The service centers are equipped to
provide rapid turn-around at a reasonable cost and oer
new valve warranty with all reconditioned valves.
NOTE: When sending goods to the service center for repair,
do not disassemble them. Clean the valve carefully and
ush the valve internals. Include the material safety data-
sheet(s) (MSDS) for all media owing through the valve.
Valves sent to the service center without MSDS datasheet(s)
will not be accepted.
For further information on spare parts and service or assis-
tance visit our web-site at www.metso.com/valves.
NOTE: When ordering spare parts, always include the fol-
lowing information:
a. Valve catalog code from identication plate,
b. If the valve is serialized – the serial number (from
identication plate),
c. From exploded view, the ballooned part number,
part name and quantity required.
CORRECT
INCORRECT
Figure 1
Subject to change without prior notice.
Metso Flow Control Inc.
Europe, Vanha Porvoontie 229, P. O. Box 304, FI-01301 Vantaa, Finland. Tel. +358 20 483 150. Fax +358 20 483 151
North America, 44 Bowditch Drive, P. O. Box 8044, Shrewsbury, M A 01545, USA. Tel. +1 508 852 0200. Fax +1 508 852 8172
South America, Av. Independéncia, 2500-Iporanga, 18087-101, Sorocaba-São Paulo, Brazil. Tel. +55 15 2102 9700. Fax +55 15 2102 9748
Asia Pacic, 238B Thomson Road, #17-01 Novena Square Tower B, Singapore 307685. Tel. +65 6511 1011. Fax +65 6250 0830
China, 11/F, China Youth Plaza, No.19 North Rd of East 3rd Ring Rd, Chaoyang District, Beijing 100020, China. Tel. +86 10 6566 6600. Fax +86 10 6566 2583
Middle East, Roundabout 8, Unit AB-07, P. O. Box 17175, Jebel Ali Freezone, Dubai, United Arab Emirates. Tel. +971 4 883 6974. Fax +971 4 883 6836
www.metso.com/valves
4 IMO-PX2 EN