Need help?Do you have a question about the Metso Jamesbury Wafer-Sphere K815W and is the answer not in the manual?
General| Brand | Metso |
|---|---|
| Model | Jamesbury Wafer-Sphere K815W |
| Category | Control Unit |
| Language | English |
Details the eccentric shaft design and positive stop feature for superior performance.
Details the wafer body design, including centering holes/slots for alignment.
Provides installation guidelines for cryogenic Wafer-Sphere valves, including orientation.
Covers general installation advice, actuator stop usage, disc position checks, and flange assembly.
Recommends valve inspection every five years and routine tightening of the compression plate.
Outlines procedures for safe valve removal from the pipeline, including actuator considerations.
Step-by-step guide for replacing the CTFE seat, including cleaning and torquing.
Instructions for replacing composite seats, including gasket installation and torquing.
Procedure for replacing shaft seals (packing), including component removal and tightening.
Detailed steps for disassembling and reassembling the valve components, including cleaning.
Details the procedure for leak testing cryogenic valves, emphasizing inert gas usage.
Crucial safety warnings for actuator mounting, emphasizing correct indicator and assembly.
Step-by-step guide for mounting actuators, including coupling, bracket, and torque specifications.
Recommends using service centers for maintenance and lists information needed for ordering spare parts.
To Next Page