Need help?Do you have a question about the Metso neles EJ Series and is the answer not in the manual?
General| Brand | Metso |
|---|---|
| Model | neles EJ Series |
| Category | Controller |
| Language | English |
Details the scope of information provided in the instructions.
Explains the pneumatic double diaphragm actuator's operational principle and construction.
Identifies the information found on the actuator's identification label.
Presents key technical specifications including operating temperature and torque.
Outlines essential safety precautions for handling and operating the actuator.
Specifies the type of fluid required for actuator operation.
Details the procedure for mounting the actuator onto a valve via ISO 5211 interface.
Describes how to connect the ND800 valve controller directly to the actuator.
Provides instructions for safely removing the actuator from the valve assembly.
Overview of general maintenance requirements for the actuator under normal conditions.
Step-by-step guide for replacing the diaphragm at the springless end.
Instructions for replacing the diaphragm at the spring end of the actuator.
Procedure for removing and installing the actuator's drive shaft.
Detailed exploded view and parts list for the EJ05 actuator model.
Exploded view and parts list for EJ07 through EJ14 actuator models.
Provides dimensional data and weights for the EJ series actuators.
Details the connection interface dimensions for various actuator models.
To Next Page