Need help?Do you have a question about the Metso neles EJ 10 and is the answer not in the manual?
Outlines critical safety precautions for handling, operation, and maintenance of the actuator.
Explains the process of mounting the actuator onto a valve using the ISO 5211 standard interface.
Describes the reverse procedure for safely removing the actuator from the valve assembly.
Step-by-step guide for replacing the diaphragm on the springless side of the actuator.
Detailed instructions for replacing the diaphragm on the spring side of the actuator.
Outlines critical safety precautions for handling, operation, and maintenance of the actuator.
Explains the process of mounting the actuator onto a valve using the ISO 5211 standard interface.
Describes the reverse procedure for safely removing the actuator from the valve assembly.
Step-by-step guide for replacing the diaphragm on the springless side of the actuator.
Detailed instructions for replacing the diaphragm on the spring side of the actuator.
General| Category | Controller |
|---|---|
| Model | EJ 10 |
| Input signal | 4-20 mA |
| Supply pressure | 1.4-7 bar (20-100 psi) |
| Brand | Metso Neles |
| Materials | Aluminium, stainless steel |
To Next Page