Need help?Do you have a question about the Metso NELES NDX1510 Series and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Manufacturer | Metso |
| Model | NDX1510 |
| Type | Valve Controller |
| Input Signal | 4-20 mA |
| Output Signal | 4-20 mA |
| Enclosure Rating | IP66/NEMA 4X |
| Certifications | ATEX, IECEx, FM, CSA |
| Series | NELES NDX |
| Operating Temperature | -40°C to +85°C (-40°F to +185°F) |
Crucial preliminary steps and qualifications before operating the valve controller.
Highlights the main advantages and characteristics of the NDX controller.
Step-by-step guide for mounting the NDX controller on Neles Globe actuators.
Instructions for installing the NDX controller using the IEC 60534-6 interface.
Details magnet mounting for Neles B-series actuators with mechanical indicators.
Instructions for mounting the NDX via bracket on Neles B-series actuators.
Explains how to restrict or manage user access to the LUI settings.
Details the necessity of calibration before the device can operate in automatic mode.
Steps for installing and setting up the Device Type Manager software.
Guide to standard DTM functions like configuration, monitoring, and diagnostics.
Details the specific user interfaces within the NDX DTM for parameterization and diagnosis.
Step-by-step instructions for replacing key components like the prestage and relay valve.
To Next Page