Need help?Do you have a question about the Mettler Toledo FiveEasy and is the answer not in the manual?
General| Resolution | 0.01 pH; 1 mV |
|---|---|
| Accuracy | ±0.01 pH; ±1 mV |
| Display | LCD |
| Calibration | Up to 3 points |
| Measurement Range | 0.00 to 14.00 pH; ±1999 mV |
| Temperature Compensation | Automatic or manual from 0 to 100°C |
| Power Supply | 4 x 1.5 V AA batteries |
| Units of Measurement | pH, mV |
| Operating Temperature | 0 to 40 °C |
| Humidity | Up to 80% relative humidity, non-condensing |
Explains signal words and warning symbols used to indicate safety issues.
Details intended use, location, and general precautions for safe operation of the instrument.
Provides a general overview of the instrument's components and features.
Details the various input and output connectors available on the FP20 and F20 models.
Explains the function of each key on the F20 model keypad.
Explains the function of each key on the FP20 model keypad.
Describes the display layout and the meaning of various icons shown on the F20 instrument.
Describes the display layout and the meaning of various icons shown on the FP20 instrument.
Guides users on how to navigate and operate the instrument's setup menu.
Explains the different measurement modes (pH, mV) available on the meter.
Lists the items included in the package when purchasing the instrument.
Provides step-by-step instructions for installing the sensor holder.
Details the procedure for connecting the power adapter to the instrument.
Explains how to properly connect the pH or mV sensor to the instrument.
Describes the steps for powering the instrument on and off.
Covers various general settings like endpoint formats, temperature capture, and buffer groups.
Guides on how to perform pH electrode calibration.
Covers the process of performing pH and mV measurements.
Information on storing, recalling, and clearing measurement results in the FP20 memory.
Details connection, configuration, and printing procedures for the FP20.
Explains how to transfer data from the FP20 to a PC.
Guides on performing and interpreting the instrument's self-diagnosis function.
Instructions for performing a factory reset, including data loss warning.
Instructions for cleaning the instrument's housing, with warnings about solvents.
Provides guidance on maintaining pH electrodes and troubleshooting common issues.
Lists common error messages and their corresponding resolutions.
Defines acceptable ranges for various measurement parameters and calibration results.
Provides information on the proper disposal of the instrument according to regulations.
To Next Page