To Next PageTo Next Page
Need help?Do you have a question about the Mettler Toledo Densito and is the answer not in the manual?
General| Brand | Mettler Toledo |
|---|---|
| Model | Densito |
| Category | Measuring Instruments |
| Language | English |
Provides information for getting started with the METTLER TOLEDO handheld density meter.
Explains conventions used in the document and their meanings.
Details the components of instructions: prerequisites, steps, intermediate results, and results.
Defines signal words and warning symbols used in safety notes to indicate hazards.
Outlines intended use, responsibilities of the instrument owner, and specific safety notes.
Provides a visual overview of the density meter's components and their functions.
Details the device's user interface, including the home screen and on-screen icons.
Lists the parts included in the package for the Densito and DensitoPro.
Provides instructions for safely removing the density meter from its packaging.
Explains how to charge the density meter using AC adapter or computer.
Details the setup required for using the sample pump, including mode activation and tube installation.
Instructions for enabling or disabling the RFID reader on DensitoPro models.
Instructions for enabling or disabling the barcode reader on DensitoPro models.
Step-by-step guide on how to turn on the density meter.
Instructions on how to properly turn off the density meter.
Covers navigating menus, confirming settings, and entering text/numbers.
Describes the two main phases: filling the cell and measuring, then preparing for the next sample.
Walkthrough of configuring and performing a density determination using the sample pump.
Outlines the recommended maintenance tasks and their frequency.
Provides procedures for cleaning the housing and the measuring cell.
Instructions for cleaning the exterior housing of the density meter.
Details how to clean the measuring cell, including using the sample pump.
Guides on how to configure and perform a test to verify measurement accuracy.
Step-by-step instructions for performing a guided accuracy test using water.
Troubleshooting steps to take if the accuracy test does not pass.
Instructions for replacing the rechargeable battery in the density meter.
Procedure for removing and installing the sample pump.
Steps to follow before storing the density meter to ensure its condition.
Information on how to properly dispose of the device according to environmental regulations.
Detailed technical specifications for the density meter itself.
Technical details related to the measurement capabilities and scales.
