Need help?Do you have a question about the Mettler Toledo Seven2Go and is the answer not in the manual?
General| Display | LCD |
|---|---|
| IP Rating | IP67 |
| Connectivity | USB |
| pH Resolution | 0.01 |
| pH Accuracy | ±0.01 |
| Temperature Resolution | 0.1 °C |
| Measurement Type | Dissolved Oxygen, Conductivity |
| Temperature Range | -5 to 105 °C |
| mV Accuracy | ±0.2 |
| Salinity Range | 0 to 80 ppt |
| mV Range | ±1999 |
Defines signal words and warning symbols used for safety instructions.
Provides safety guidelines specific to the instrument's intended use and location.
Details the main components and physical layout of the Seven2Go pH meter.
Explains the BNC and RCA sockets for connecting pH/mV and temperature sensors.
Describes the function of the T-Pad navigation control and dedicated hard keys.
Explains the various icons and display elements shown on the instrument's screen.
Guides users on navigating and interacting with the instrument's setup menu and its structure.
Lists the items included in the standard equipment package for the new instrument.
Provides step-by-step instructions for correctly installing the batteries into the instrument.
Explains the procedure for connecting ISM® sensors to the meter and data transfer.
Details how to mount accessories like the electrode holder and stabilizing unit.
Illustrates the process of attaching the wrist strap for enhanced protection against drops.
Describes the procedure for powering the instrument on and off, including auto-off function.
Covers buffer groups, defining user-defined buffers, and performing multi-point calibrations.
Step-by-step guide to performing a single-point calibration for the pH meter.
Instructions for calibrating the instrument using two calibration points.
Details the process for conducting calibrations with three, four, or five points.
Explains how to configure measurement parameters like resolution and stability criteria.
Describes the different endpoint formats available for readings: Automatic, Timed, and Manual.
How to set up periodic readings at defined time intervals.
How to use the relative mV offset feature for measurements.
Guides on performing pH and mV/rel.mV measurements on samples.
Covers both automatic (ATC) and manual (MTC) temperature capture methods.
Explains how to store, recall, and clear measurement results from the instrument's memory.
How to activate or deactivate the hot power function to prevent automatic shutdown.
Procedure for running the instrument's built-in self-diagnosis test.
Instructions for resetting the instrument to its default factory settings.
Instructions for cleaning the exterior of the pH meter, noting material sensitivity.
Guidance on maintaining pH electrodes, including storage and cleaning procedures for common issues.
Lists common error codes and provides troubleshooting steps for resolving them.
Information on the proper disposal of the device according to WEEE regulations.
Provides detailed tables of buffer values at different temperatures for various standards.
To Next Page