Need help?Do you have a question about the Mettler Toledo Seven2Go S4 and is the answer not in the manual?
General| Measurement Parameters | pH, mV, Temperature |
|---|---|
| mV Resolution | 0.1 |
| Temperature Range | -5.0 to 105.0 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Accuracy | ±0.5 °C |
| Display | LCD |
| IP Rating | IP67 |
| Data Export | USB |
| Calibration | Up to 5 points |
| pH Resolution | 0.01 |
| pH Accuracy | ±0.01 |
| mV Accuracy | ±0.2 mV |
| Temperature Compensation | Automatic or Manual |
| mV Range | ± 2000.0 |
| Memory | 200 data sets |
Explains warning symbols and signal words used to denote safety issues and warnings in the manual.
Notes on intended use, location, and general safety precautions for instrument operation.
Describes the physical layout and key components of the Seven2Go instrument.
Details the types of sensor inputs and their corresponding connector types on the instrument.
Explains the functions of the T-Pad navigation control and the instrument's physical buttons.
Details the icons and information displayed on the instrument's screen during operation.
Explains how to navigate the instrument's setup menu for configuration and settings.
Outlines the selectable units for dissolved oxygen measurements (ppm, mg/L, %).
Lists the items included in the standard package of the new Seven2Go instrument.
Provides step-by-step instructions for correctly installing batteries into the instrument.
Guides on how to attach and connect the ISM® sensor to the meter for proper function.
Instructions for mounting accessories like the electrode holder and stabilizing unit.
Details the procedure for powering the instrument on and off for use.
Details the process for calibrating the instrument to ensure accurate measurements.
Covers general and measurement settings for taking sample readings.
Instructions for storing, recalling, and clearing measurement data from the instrument.
Explains how to activate or deactivate the instrument's automatic power-off function.
Procedure for performing a self-test to check the instrument's operational status.
Steps to reset the instrument to its original factory default settings.
Guidance on the necessary service and care for the instrument's electrode.
Lists and explains common error messages and provides troubleshooting steps.
Instructions for proper disposal of the device according to WEEE regulations.
Explains the mathematical algorithm used for calculating oxygen concentration readings.
Presents data on DO solubility and salinity correction factors based on temperature.
To Next Page