Need help?Do you have a question about the Mettler Toledo HX204 and is the answer not in the manual?
General| Maximum Capacity | 220 g |
|---|---|
| Readability | 0.1 mg |
| Repeatability (Std. Dev.) | 0.1 mg |
| Linearity | ±0.2 mg |
| Settling Time (typical) | 2 s |
| Weighing Pan Size | 90 mm |
| Stabilization Time | 2 s |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Calibration | Internal |
| Interface | RS232, USB |
| Display | Touchscreen |
| Operating Temperature | 10°C to 30°C |
| Operating Humidity | 15% to 80% RH, non-condensing |
Factors influencing temperature calibration accuracy and reproducibility, recommending minimization of deviations.
Guidelines for handling and maintaining the calibration kit to ensure accurate temperature readings.
Critical environmental conditions for performing accurate temperature calibration and ensuring proper setup.
Essential steps and conditions to ensure before commencing the temperature calibration test.
Detailed sequence of operations for conducting the temperature calibration test on the moisture analyzer.
Procedures for addressing calibration results that exceed defined warning or control limits.
Defines the acceptable tolerance ranges (Warning and Control Limits) for calibration results.
To Next Page
