Need help?Do you have a question about the Mettler Toledo Seven2Go S3 and is the answer not in the manual?
General| Measurement Parameter | pH, mV, Temperature |
|---|---|
| pH Range | -2.00 to 20.00 |
| pH Resolution | 0.01 |
| pH Accuracy | ±0.01 |
| pH Relative Accuracy | ±0.01 |
| mV Resolution | 0.1 |
| mV Relative Accuracy | ±0.2 |
| Temperature Range | -5.0 to 105.0 °C |
| Temperature Resolution | 0.1 °C |
| Display | LCD |
| Calibration | Up to 5 points |
| IP Rating | IP67 |
| Data Export | USB |
| Temperature Relative Accuracy | ±0.5 °C |
| Memory | 200 data sets |
Explains signal words and warning symbols used in the manual.
Provides specific safety guidelines for the instrument's intended use and location.
Details instrument components, sensor connections, and control keys.
Explains the meaning of various icons displayed on the instrument screen.
Guides users on navigating the setup menu and outlines its structure.
Lists the different parameters that the conductivity meter can measure.
Lists the items included in the product package.
Provides step-by-step instructions for installing the instrument's batteries.
Explains the procedure for connecting an ISM sensor to the meter.
Details mounting of electrode holder and stabilizing unit.
Illustrates the process of attaching the wrist strap for security.
Describes how to power the instrument on and off.
Explains how to determine cell constant and perform calibration.
Details the steps to perform a calibration with sensor and standard.
Covers general settings for stability and measurement endpoint formats.
Covers interval reading and reference temperature settings.
Details how to set temperature correction and alpha-coefficients.
Explains TDS factor setting and conductivity ash measurement methods.
Guides on performing conductivity, TDS, salinity, and resistivity measurements.
Explains storing, recalling, and clearing measurement results.
Covers hot power settings, instrument self-test, and factory reset.
Provides instructions on how to clean the instrument's housing.
Lists common error messages and their solutions.
Explains the proper disposal procedures for the instrument.
Lists conductivity standard values at different temperatures.
Provides temperature correction factors for non-linear conductivity correction.
Covers alpha-values, salinity formula, and TDS conversion factors.
Details formulas for conductivity ash measurement for refined sugar and raw sugar.
To Next Page