Need help?Do you have a question about the Metz 58 AF-1 P and is the answer not in the manual?
Important safety guidelines for using the flash unit, avoiding hazards like eye damage and explosions.
Details on compatible battery types for operating the flash unit.
Step-by-step guide for correctly inserting and replacing batteries in the flash unit.
Instructions on how to attach and detach the flash unit to camera lenses.
Procedures for switching the flash unit on and off for operation and storage.
How to install and use the infrared clamp for specific lighting control.
Steps for initial startup and selecting the operating mode after a reset.
Introduction to master/slave systems, channels, and groups for remote flash control.
Guide to setting up remote control modes, channels, and groups for various camera brands.
Detailed steps for configuring remote channels and groups for camera-specific operation.
Step-by-step process to set specific remote channels and groups for camera-specific systems.
How to operate the flash unit wirelessly as a slave without a camera-specific system.
Guide to the 'Learn function' for automatic slave adjustment and red-eye effect reduction.
Detailed steps for the 'Learn function' and adjusting lighting ratios or partial lighting.
How to operate in 'Slave mode' after learning and adjusting reflectors or partial lighting.
How to swivel the reflectors for different beam angles and working distances.
Guide to installing and removing the bounce diffuser for close-up lighting.
Guidelines for using the tripod thread when the flash is a slave unit without a camera.
Information on updating the flash unit's firmware via USB.
Procedure to reset the flash unit to its original factory settings.
Procedure for conditioning the flash capacitor after periods of non-use.
Detailed technical specifications, dimensions, weight, scope of delivery, and accessories.
General| Brand | Metz |
|---|---|
| Model | 58 AF-1 P |
| Category | Camera Flash |
| Language | English |
To Next Page