33
M3D-SUB PHYSICAL SPECIFICATIONS
Enclosure Multi-ply hardwood
Finish Black textured (weather protected)
Note: Custom color available upon request
Protective grill Powder-coated hex stamped steel
Rigging QuickFly MRF-3D Rigging Frame with integral CamLinks, rear connecting bars, and
captive quick release pins
Weather protection Standard
Dimensions 54" W x 20" H x 30.5" D (1372 mm x 508 mm x 775 mm)
Weight Net: 395 lbs (179 kg)
20.00"
[508 mm]
30.50"
[775 mm]
8.50"
[215 mm]
10.00"
[254 mm]
9.56"
[243 mm]
To ensure proper operation, allow at least 6 inches
WARNINGS:
This surface may reach high tempuratures white in use.
THIS PRODUCT MUST BE GROUNDED
ATENCI”N:
do not expose this appliance to rain or moisture.
AUTHORIZADO A PERSONAL T…CNICO CALIFICO
No operator or serviceable parts inside.
Refer servicing to qualified personnel
.
To reduce the risk of fire or electric shoc
k
ATTENTION:
NO OPERATOR SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
PERSONNEL TECHNIQUE QUALIFI…
U.K. WARNING:
INTERNES NE SONT AUTORISEES QU'AU
ACHTUNG:
UND REPARATUR NUR DURCH ELEKTROF√CHKRAFTE
To reduce the risk of electric shock do not remove cover.
50-60Hz 50-60Hz
1400W RMS MAX 1400W RMS MA
X
Operational Voltage Range:
Turn on 85V~ Turn off 134V~
Turn on 165V~ Turn off 264V
~
95-125V
~ 208-235V~
A
uto-Voltage Select
clearance from this surface and adequate ventilation.
Acti
vit
y
W
in
k
R
e
s
e
t
Ser
v
i
c
e
ENTRETIENET REPARATIONS
THIS APPARATUS MUST BE EARTHED
.
GEH√USE NICHT OFFENE WARTUNG
ACCESO INTERNO SOLO
51.00"
[1295 mm]
54.00"
[1372 mm]
Figure 42. M3D-Sub Directional Subwoofer physical dimensions
MTG-3D TOP GRID PHYSICAL SPECIFICATIONS
Finish Black powder coated
Dimensions Width: 55.60" (1412 mm)
Height: 14.54" (369 mm)
Depth with extension in extended position: 50.70" (1288 mm)
Depth with extension in closed position: 37.43" (951 mm)
Weight 308 lbs (139.71 kg)
To Next Page
Loading...
