Meyer Manufacturing Corporation - 44 - PB-SXI
• Check for damaged or missing safety signs (decals); replace if necessary.
• Replace worn or damaged parts.
• Touch up all paint nicks and scratches to prevent rusting.
• Place the equipment in a dry protected shelter.
• Place the equipment flat on the ground.
8.5 RETURNING THE SPREADER TO SERVICE
After the Meyer spreader has been in storage, it is necessary to follow a list of items to return the equipment to service.
• Be sure all shields and guards are in place.
• Lubricate the equipment.
• Connect to a truck (if required) and operate the truck and equipment; verify all functions operate correctly.
• Connect to a tractor (if required) and operate equipment; verify all functions operate correctly.
• Check for leaks; repair as needed.
To Next Page
Loading...
