To Next PageTo Next Page
Need help?Do you have a question about the Meyer 7200 and is the answer not in the manual?
Details commercial use warranty coverage for parts and labor.
Details product registration, serial number plate location, and its importance.
Emphasizes observing and following personal safety instructions for safe operation.
Defines DANGER, WARNING, and CAUTION signal words for hazard communication.
Covers drawbar setup, PTO connection, bolt checks, and hydraulic connections.
Provides requirements for tractor towing size based on spreader weight.
Explains the necessity and proper installation of a safety chain for secure towing.
Discusses the need for a light converter for truck-mounted spreaders.
Instructions on how to safely and correctly load the spreader.
Details the process of spreading application in the field.
Details the correct procedure for attaching the PTO driveline.
Safety warning and instructions for PTO setup.
Instructions for lubricating components before initial use.
Details lubrication points and frequency during normal operation.
Provides critical maintenance tips for PTO driveline longevity.
Details adjustment of front drive roller chain tensioners.
Explains how to adjust spinner material guides for optimal spread pattern.
Details the adjustment procedure for spring-loaded material guides.
Describes adjusting the shear arm material guide and its shear bolt.
Detailed breakdown of the 918-0210 PTO drive shaft assembly.
Provides recommended tire inflation pressures for various tire sizes.
General| Capacity | 1.5 cu. yd. |
|---|---|
| Spread Width | 4' to 30' |
| Hopper Length | 72" |
| Hopper Width | 48" |
| Overall Height | 34" |
| Hopper Capacity | 1.5 cu. yd. |
| Spreading Width | 4' to 30' |
| Power Source | Electric |
| Weight | 540 lb |
| Mounting Type | Truck Bed |
