Meyer SXI 720 Series - Page 63

1-800-325-9103
PB-SXI - 63 - www.meyermfg.com
KEY PART NUMBER QTY DESCRIPTION
1 926-0504 1 Left Auger Weldment (720)
926-0501 1 Left Auger Weldment (865)
2 925-3773 1 T-Post Weldment
3 925-3771-4 1 Auger Hold Down Collar
4 925-3864-1 2 Auger Ring Hold Down Nylon Bearing
5 881-7510-1.5 2 3/4-10 x 1-1/2” Machine Bolt
6 822-0075-Z 2 3/4” Split Lock Washer
7 926-3701-2-1 2 Rear Splined Sleeve With Washer Welded Assembly
8 926-3701-1 1 Splined Shaft
9 914-3812-NSM 2 Nylon Auger Thrust Bearing
10 914-3813 2 Seal
11 See Page 56 & 58 2 Front Auger Bushing Assembly
12 926-3770-9 1 Splined Shaft
13 926-0503 1 Right Auger Weldment (720)
926-0500 1 Right Auger Weldment (865)
14 933-3801 1 Bronze Washer
15 933-3802 1 Front Auger Washer
16 933-3753 1 3rd Auger Collar
17 926-0505 1 3rd Auger Weldment (720)
926-0502 1 3rd Auger Weldment (865)
18 933-0506 1 Nylon Washer
19 913-3701 1 Auger Nylon Bushing
20 925-3770 1 3rd Auger Bushing
21 926-3750-3 2 Front Auger Bearing Seal Collar
22 933-3704 2 Front Auger Washer
23 926-3701-2 2 Splined Sleeve