MFJ MFJ-213 - Charging Function

—
MFJ-213
HF/VHF/UHF
Antenna
Analyzer
Instruction
Manual
Return
Loss
Function
(2.Loss):
Connect
the antenna
to the Antenna
connector.
Set the frequency
and read
the results.
Stimulus Frequency
Return Loss Mode ae 5,
Coax Loss Mode
L/C Function (3,LC-meter):
Connect the capacitor, inductor or unknown load to be measured to the
Antenna connector.
Select the frequency to test at.
Measure the results.
Stimulus Frequency
Measure C Mode
Capacitance
Stimulus Frequency
Measure L Mode
Inductance
Charging Function (4.Chr):
Plug in external power supply.
Select 4.Chr and charging will start and backlight will turn off.
When fully charged the display will indicate CHARGING COMPLETE.
Version | 18 © 2012 MF/ Enterprises, Inc