MFJ-941EK Tuner Kit Instruction Manual
- 26 -
TECHNICAL ASSISTANCE
3. T-Network Circuitry: Recheck all solder connections and confirm the Inductor
knob is oriented properly on the switch. Also, look for signs of burned or
damaged switch contacts. Finally, carefully inspect the two variable capacitors for
uneven plate spacing or shorted plates.
4. Balun: Recheck solder connections. If okay, remove the balun from its mount
and inspect windings for damage caused by over-tightened hardware.
If you are still unable to resolve the difficulty, refer to the Warranty page to review
options for factory assistance.
TECHNICAL ASSISTANCE
If you have any problem with this unit first check the appropriate section of this
manual. If the manual does not reference your problem or reading the manual
does not solve your problem, you may call MFJ Technical Service at 662-323-
0549 or the MFJ Factory at 662-323-5869. You will be best helped if you have
your unit, manual and all information on your station handy so you can answer
any questions the technicians may ask.
You can also send questions by mail to MFJ Enterprises, Inc., 300 Industrial Park
Road, Starkville, MS 39759; by Facsimile (FAX) to 662-323-6551; or by email to
techinfo@mfjenterprises.com. Send a complete description of your problem, an
explanation of exactly how you are using your unit, and a complete description of
your station.
To Next Page
Loading...
