MFJ Multi-mode Data Controller MFJ-1278B - Page 362

MFJ-1278B MULTI-MODE APPENDIX H COMMAND SUMMARY
Command Paramete
r
Default Mode Function Page
CONPERM
ON|OFF off Packet Allows a connection to become
permanent.
6-32
CMSG
ON|OFF off Packet Enable a message to be transmitted
whenever there is a connection made.
6-33
CMSGDISC
ON|OFF off Packet Controls whether the MFJ-1278B will
initiate a disconnect sequence after it is
connected to.
6-33
COMMAND
n $03 (^C) All Sets the character used to enter the
command mode from CONVERS mode.
6-34
CONMODE
C|T C Packet Sets the MFJ-1278B to enter the
transparent mode or converse mode
automatically.
6-35
CONNECT
C1|Cx none Packet Issues a connect from the command mode
to another packet station.
6-36
CONOK
ON|OFF on Packet Determines the action taken by the MFJ-
1278B when it receives a connect request.
6-37
CONSTAMP
ON|OFF off Packet Enables the time stamping when a
disconnect occurs.
6-38
CONVERS
-- I-command All Forces the MFJ-1278B to enter the
converse mode.
6-38
CONVERSE
-- I-command AMTOR Switches from the command mode to the
text transmission mode in AMTOR.
6-38
CPACTIME
ON|OFF off Packet Enables the automatic transmission of
packets in the converse mode.
6-39
CR
ON|OFF on Packet Causes the MFJ-1278B to send a <CR>
every time a new line character is sent.
6-40
CTEXT
text blank Packet Determines the packet text to be sent
when a connect is made.
6-40
CSTATUS
-- I-command Packet Shows streams identifier and link state of
all streams.
6-41
CWCALL
ssss blank AMTOR Characters are sent as CW when ID
character are issued.
6-41
CWIDmode
nn 0 Pactor Determines the CWIDmode used when in
the Pactor mode.
6-42
CWSENDCH
nnn $ff CW Controls how MFJ-1278B transmits the
pending text in the CW buffer.
6-43
CWSPEEDM
ON|OFF off CW Causes the MFJ-1278B to adopt the
incoming CW speed as its transmit speed.
6-43
DAYTIME
D/T none Packet Sets the time and date used by the MFJ-
1278B.
6-44
DAYUSA
ON|OFF on Packet Determines the display format for the time
and date.
6-45
DDisc
-- I-Command Pactor This is the last resort disconnect for the
Pactor mode.
6-45
DISCONNECT
-- I-command Pactor Initiates a standard Pactor disconnect. 6-45
DISplay
-- I-command Pactor Displays all Pactor commands, while in
the Pactor mode.
6-45