207206
Tyre Inflation Pressure (Cold State)
TECHNICAL DATA
Wheel Alignment Parameters (No Load)
Project Range (Unit: Degree)
Front Wheel Camber -26’±45’
0
Caster 4 15’±45’
Toe 0±5’
0 0
King Pin Inclination 12 7’±1
0
Rear Wheel Camber -1 ±45’
Toe 11’±20’
Tyre Model Project
Tyre Inflation Pressure (unit: Psi)
At no load At full load
215/60R17
Front Tyre 34
Rear Tyre 34
215/55R18
Front Tyre 35
Rear Tyre 35
TECHNICAL DATA
Other Parameters
Project Parameters
Requirement for dynamic balance of wheels Dynamic unbalance <15 g
Reasonable range of brake pedal free travel <30 mm
Minimum scrapping thickness of front brake disc 24mm
Minimum scrapping thickness of front brake lining 2mm
Minimum scrapping thickness of rear brake disc 8mm
Minimum scrapping thickness of rear brake lining 2mm
To Next Page
Loading...
