9594
INSTRUMENTS AND CONTROLSINSTRUMENTS AND CONTROLS
ESC Fault Warning Lamp
The warning lamp illuminates after the ignition
switch is turned on and it goes out several
seconds later. This indicates that the warning
lamp can work normally. The ESC lamp flashes
once the ESC function is triggered off. The
system informs the driver that ESC is working
in this way. If the ESC lamp keeps illuminated,
it indicates an ESC fault. Please refer to
information given in “Electronic Stability
Control (ESC)” under “Driving and Controls”.
ESC OFF Indicator
The warning lamp illuminates after the ignition
switch is turned on and it goes out several
seconds later. This indicates that the warning
lamp can work normally. If you press “ESC
OFF” switch when the vehicle speed has not
exceeded the threshold value, certain
functions of ESC will be deactivated. At this
time, ESC OFF indicator illuminates. Please
refer to information given in “Electronic
Stability Control (ESC)” under “Driving and
Controls”.
Generally, it is not advised to turn ESC
OFF switch off.
Note
Transmission Fault Warning Lamp*
The transmission fault warning lamp
illuminates when the ignition switch is turned
on and it goes out several seconds later. This
indicates that both the warning lamp bulb and
the automatic transmission control system
can work normally.
For certain vehicle models, the warning lamp
does not illuminate when the ignition switch is
turned on. It only illuminates upon fault
occurrence.
In case of an automatic transmission system
fault, the warning lamp will give out indication
in any of the following ways:
Ÿ The lamp does not illuminate when the
ignition switch is turned on.
Ÿ The lamp does not go out after it
illuminates.
Ÿ Flashing or keeping illuminated during
driving.
In case of this, please contact the Service
Center in time.
Emergency Parking (EP) Indicator*
Cruise Control System Working
Condition Indicator*
For vehicle models equipped with a dual clutch
transmission (DTC), if the transmission is
subject to a serious functional malfunction
during driving, the instrument will send out an
alarm sound.
In case of this, please stop the vehicle at the
nearest safe place and contact the MG
Authorised Service Center immediately.
Please do not continue driving until the fault is
removed.
This indicator illuminates when the cruise
control function is activated. Refer to
information given in “Cruise Control System”
under “Driving and Controls”.
To Next Page
Loading...
