Instruments
57
2
5. Trip recorder reset button
Whenever the starter switch is turned on, the display shows the
odometer reading. By pressing the trip recorder reset button
briefly, the display will change to show the trip recorder reading
(a further press of the button returns the display to the odometer
reading).
With the trip reading displayed, press and hold the reset button for
two seconds to cancel the trip reading and reset the display to zero.
6. Fuel gauge
The pointer indicates the fuel level, even when the starter switch
is turned off. After refuelling, the gauge slowly rises to the new
level after the starter switch is turned on.
NOTE: Driving on twisting or hilly roads, may disturb the accuracy of
the gauge. It is advisable to check the fuel level when the car is on level
ground.
Never allow the car to run out of fuel - the resultant misfire
could damage the catalytic converter.
To Next Page
Loading...
Need help?
General
