16 CM-Direct Driven Operator's Manual 1996
STORAGE & MAINTENANCE
SPECIFIC MAINTENANCE:
ENGINE: The engine instructions that accompany your unit detail specic
procedures for maintenance of the engine. Following the engine manufacturer's
recommendations will extend engine work life.
PUMP: Change the pump oil after the rst 25 hours of operation. After initial
change, every 3 months or 100 hour intervals are recommended. If oil appears
dirty or milky, changes may be required in greater frequency. Use Mi-T-M pump oil
(#AW-4085-0016) and ll only to the center of the oil sight glass. DO NOT
overll.
To Next Page
Loading...
