SF52 User’s Manual
2 97224 Issue 5, June 2017
INSTALLATION
2 INSTALLATION
2.1 Unpacking the Instrument
On delivery, check that all the following standard components are in the packing box:
• SF52 transmitter
• G ½” BSP - Bonded seal fi tted over threaded part of transmitter body.
NOTE: Not applicable to the ½" NPT
• Certifi cate of calibration
• Quick Start Guide
NOTE: If any component is not present, contact Michell Instruments
immediately.
NOTE: Do not touch the fi lter disc at the front of the SF52.
Figure 1
SF52
To Next Page
Loading...