MICODUS ML935 - SMS Commands List

Functions Command Format Explanation
9. Full SMS Commands List
GPRS
Set APN
GPRS+123456
apn+123456+apn content Set APN (old one will be replaced)
APN user apnuser+123456+space+content Set APN username (If without, please ignore)
Set APN password (If without, please ignore)
Set authorized number, only these numbers can
control the unit
Open GPRS
noGPRS+123456 Shut GPRS
Set authorized number
admin+123456+space+number
noadmin+123456+space+number
Set password
Retrieve password
Timezone
Monitor mode
Tracking mode
password+old 123456+space+
new 123456
Set password
Set GMT time zone number. (default: 0)
Switch to the monitor mode. You will hear sounds
near the unit after you call it
Switch to the tracking mode, you will get geo-info
after you call it
cpwd
timezone+123456+space+GMT No.
monitor123456
tracker123456
APN password apnpasswd+123456+space+content
SMS Tracker
Latitude & longitude queryG+123456#
Upload command
Upload information every 15 second
(default: 120 seconds)
upload+123456+space+15（Ranged:
10-43200）
Shock alert
Armshock+password
Unarmnoshock+password
Sleep mode
Efault mode-save much power,tracker will fall
asleep in 5 minutes (default: 5 minutes)
sleep+123456+space+time;
sleep+123456+space+time10
(Change interval time)
Tracker will enter sleep mode after detect no shock
in 5 minutes
sleep+123456+space+shock;
sleep+123456+space+shock10
(Change interval time)
Vibrator sms
alarm on/off
Defaulted:ONvibalm123456
novibalm123456
Tracker will continue workingsleep+123456+space+off