MICODUS MV790 - Page 9

Sleep Mode
sleep123456 time
sleep123456 shock
sleep123456 off
Functions Command Format Explanation
Vibrate Alarm
Tow Alarm
Auto Arm By ACC
Engine On/Off Alarm
towA,B
A: 1-4, 1: SMS alarm, 2: Call alarm, 3: SMS+Call,
4: Platform alarm; B: Distance (500-10000m)
Time scope: 5-1200 secondsacclt,time
autorep123456,AB
A=0 (Engine ON: No Alarm); A=1 (Engine ON: SMS only);
A=2 (Engine ON:Platform only);
A=3 (Engine ON: SMS+Platform)
B=0 (Engine OFF: No Alarm); B=1 (Engine OFF: SMS only);
B=2 (Engine OFF: Platform only);
B=3 (Engine OFF: SMS+Platform)
vibx,y
x=1-3( 1: SMS alarm, 2: Call alarm, 3: SMS first then Call );
y=1-9,1 is the most sensitive
Cancel sleep mode
vibcall+123456
Vibrate call alarm set ok ( If device keep stationary more than
5 minutes the device will enter into sleep mode automatically,
vibration, sms commands and call can wake up it)
Vibrate sms alarm set ok(If device keep stationary more than
5 minutes the device will enter into sleep mode automatically,
vibration, sms commands and call can wake up it)
vibalm+123456
Voice Monitor
Track Mode
monitor123456
Note: This command is used to switch the tracker to monitor
mode, then dial the sim number of the tracker from the admin
number, the device will pick up call automatically.
Note: This command is used to switch the tracker back to
track mode after voice monitor
tracker123456
If device keep stationary more than 5 minutes the device will
enter into sleep mode automatically, sms commands and
call can wake up it
If device keep stationary more than 5 minutes the device will
enter into sleep mode automatically, vibration, sms
commands and call can wake up it