MCS‐BMS‐GATEWAYStartupGuide Revision4.0
MicroControlSystems5580EnterprisePkwy,FortMyers,FL33905USAWeb:www.mcscontrols.com
Tel:(239)6940089Fax:(239)6940031
5
1 INTRODUCTION
MCS‐BMS‐GATEWAYisanexternal,highperformanceBuildingAutomationmulti‐protocolgatewaythathasbeen
preprogrammedtosupportBACnet®
1
MS/TP,Metasys®
2
N2byJCI,andLonWorks®
3
.Configurationsforthevarious
protocols are stored within the MCS‐BMS‐GATEWAY and are selectable via DIP switches for fast and easy
installation.Itisnotnecessarytodownloadanyconfigurationfilestosupporttherequiredapplications.
ThisdocumentprovidesthenecessaryinformationtofacilitateinstallationoftheMCS‐BMS
‐GATEWAY.
1.1 BTLMark–BACnetTesting Laboratory
1.2 LonMarkCertification
1
BACnetisaregisteredtrademarkofASHRAE
2
MetasysisaregisteredtrademarkofJohnsonControlsInc.
3
LonMarkisaregisteredtrademarkofLonMarkInternational
4
LonWorksisaregisteredtrademarkofEchelonCorporation
The BTL Mark on the MCS‐BMS‐GATEWAY is a symbol that indicates to a consumer
that a product has passed a series of rigorous tests conducted by an independent
laboratorywhichverifiesthatthe productcorrectlyimplementstheBACnetfeatures
claimedinthelisting.Themarkisasymbolof
ahigh‐qualityBACnetproduct.Goto
http://www.bacnetinternational.net/btl/ for more information about the BACnet
TestingLaboratory.
LonMarkInternationalistherecognizedauthorityforcertification,education,and
promotionofinteroperabilitystandardsforthebenefitofmanufacturers,integrators
andendusers.LonMarkInternationalhasdevelopedextensiveproductcertification
standardsandteststoprovidetheintegratoranduserwithconfidencethatproducts
frommultiplemanufacturersutilizingLonMark
devicesworktogether.MicroControl
SystemshasmoreLonMarkCertifiedgatewaysthananyothergateway
manufacturer,includingtheProtoCessor,MCS‐BMS‐GATEWAYsandMCS ‐BMS‐
GATEWAYforOEMapplicationsandthefullfeatured,configurablegateways.
To Next Page
Loading...