Page 18
Delivery
wireSENSOR, WPS
3. Delivery
3.1 Unpacking, Included in Delivery
Do not unpack the sensor by pulling the wire or wire bolt / clip.
Ensure that the goods are forwarded in such a way that no damage can occur.
Check the delivery for completeness and shipping damage immediately after unpacking.
If there is damage or parts are missing, immediately contact the manufacturer or supplier.
i
Remove shipping protection of measuring wire by qualified personnel only and immediately before
mounting.
3.2 Storage
Store only with the transport protection in place. This prevents the measuring wire being pulled out and ac-
cidental is snapping back.
- Storage temperature: -40 °C to +80 °C (-40 to +176 °F)
- Humidity: 5 - 95 % (non-condensing)
- Atmospheric pressure
To Next Page
Loading...
