Page 7
Safety
wireSENSOR, WPS
1. Safety
System operation assumes knowledge of the operating instructions.
1.1 Symbols Used
The following symbols are used in these operating instructions:
Indicates a hazardous situation which, if not avoided, may result in minor or mode-
rate injury.
Indicates a situation that may result in property damage if not avoided.
Indicates a user action.
i
Indicates a tip for users.
1.2 Warnings
Do not open the sensor housing.
> Risk of injury from pre-tensioned spring motor
Do not let the measuring wire rewind without control (snap back).
> Risk of injury from whiplash effect of the wire with assembly bolts/clips
> Destruction of wire and/or of sensor
Do not pull or loop the measuring wire around unprotected parts of the body.
> Risk of injury
Connect the power supply in accordance with the safety regulations for electrical equipment.
> Risk of injury
> Damage to or destruction of the sensor safety
To Next Page
Loading...
