Declaration of Incorporation
Declaration of incorporation according to the EC Machinery Directive 2006/42/EC, Annex II B
The manufacturer and person authorized to compile the relevant technical documents
MICRO-EPSILON MESSTECHNIK
GmbH & Co. KG
Königbacher Straße 15
94496 Ortenburg / Germany
hereby declare that the machine designated below complies with the relevant fundamental health and safety requirements of the EC
Machinery Directive, including modifications to it applicable at the time of this declaration, based on its design and construction and in
the version put on the market by us – to the extent that the scope of supply allows.
Machine design: Draw-wire sensor (mechanics and models with potentiometer output)
Type designation: WDS-xxx, WPS-xxx
The following fundamental health and safety requirements according to Annex I of the directive specified above have been applied
and complied with:
- No. 1.1.2. Principles of safety integration
- No. 1.7.3. Marking of machinery
- No. 1.7.4. Operating instructions
To Next Page
Loading...
